Adhesives

ProductTypeVisocityPHDownload Link
AOPL 55 PAPressure Sensitive Adhesive4000-10000 cP4 - 6Click to Download
AOPL 303Pvc Lamination Adhesive6500 – 8500 cP5.5 - 6.5Click to Download
AOPL 308Pvc Lamination Adhesive5000 – 6000 cP5.5 - 6.5Click to Download
AOPL 404Bopp Lamination Adhesive7000 – 8000 cP5.5 - 6.5Click to Download
AOPL 408Bopp Lamination Adhesive5000 – 6000 cP5.5 - 6.5Click to Download
AOPL 505Bopp Lamination Adhesive8200 – 9200 cP5.5 - 6.5Click to Download
AOPL A117Bopp Tape Adhesive250 – 350 cP8.0 - 9.0Click to Download
AOPL EMP 50Pressure Sensitive Adhesive5000 – 7000 cP5 - 7Click to Download

Note: The above information is to the best of our knowledge true and accurate. Since the conditions that the products are used in cannot be handled or controlled by us we cannot guarantee the results and assume liability to damages incurred by using this product Refer to M.S.D.S. for handling procedures.

AOPL- 55PA - Pressure Sensitive Adhesive

Solids : 55 ± 2%

Visual Appearance : Milky White

Viscosity @ 30ºCby : 4000-10000 cP
Brookfield RVT
Spindale No 7
RPM 20

PH : 4-6

TYPE OF APPLICATIONS : Roller Coating, Silk Screen, Brush

CHARACTERISTICS : Consistent performance, Good Track & Peel & Good resistance to ageing.

SUGGESTED USED : Pressure Sensitive Stickers, Stock Labels Etc.

PRECAUTIONS : Store in Sealed containers in dry conditions at Temperature between 15-30ºC, away from Direct heat, sunlight, dust and Moisture. Containers once opened should be used on a First in, first out basis. Do not mix with other products, as it can lead to incompatibility and other related problems.

AOPL – 303 - Lamination adhesive for high quality printed board

AOPL –303 is a vinyl-acrylic copolymer emulsion for high quality pvc lamination on board, film and Bopp substrates.

Type : Vinyl acetate Acrylic Copolymer

Solids : 33±1%

Visual Appearance : Milky White

Viscosity @ 30ºCby : 6500 – 8500 cP
Brookfield RVT
Spindale No 7
RPM 20

PH : 5.5-6.5

Application guidelines : AOPL –303 can be diluted with polyacrylic acid solution up to 5-10% w/w for viscosity adjustment. The adhesive should be applied as thin as possible with adequate wetting. the performance of the coating depends upon the porosity, absorptive and the type of surface. In general the film should be under slight tension to eliminate the wrinkles. Additionally the speed of the machine should be adjusted based on the level of dilution done to allow proper setting of the coating

AOPL – 308 - Lamination adhesive for high quality printed board

AOPL –308 is a vinyl-acrylic copolymer emulsion for high quality pvc lamination on board, film and Bopp substrates.

Type : Vinyl acetate Acrylic Copolymer

Solids : 33±1%

Visual Appearance : Milky White

Viscosity @ 30ºCby : 5000 – 6000 cP
Brookfield RVT
Spindale No 7
RPM 20

PH : 5.5-6.5

Application guidelines : AOPL –308 can be diluted with polyacrylic acid solution up to 5-10% w/w for viscosity adjustment. The adhesive should be applied as thin as possible with adequate wetting. the performance of the coating depends upon the porosity, absorptive and the type of surface. In general the film should be under slight tension to eliminate the wrinkles. Additionally the speed of the machine should be adjusted based on the level of dilution done to allow proper setting of the coating.

AOPL – 404 - Lamination adhesive for high quality printed board

AOPL –404 is a vinyl-acrylic copolymer emulsion for high quality pvc lamination on board, film and Bopp substrates.

Type : Vinyl acetate Acrylic Copolymer

Solids : 44±1%

Visual Appearance : Milky White

Viscosity @ 30ºCby : 7000 – 8000 cP
Brookfield RVT
Spindale No 7
RPM 20

PH : 5.5-6.5

Application guidelines : AOPL –404 can be diluted with polyacrylic acid solution upto 5-10% w/w for viscosity adjustment. The adhesive should be applied as thin as possible with adequate wetting. The performance of the coating depends upon the porosity, absorptivity and the type of surface. In general the film should be under slight tension to eliminate the wrinkles. Additionally the speed of the machine should be adjusted based on the level of dilution done to allow proper setting of the coating.

AOPL – 408 - Lamination adhesive for high quality printed board

AOPL –408 is a vinyl-acrylic copolymer emulsion for high quality PVC lamination on board, film and Bopp substrates.

Type : Vinyl acetate Acrylic Copolymer

Solids : 48±1%

Visual Appearance : Milky White

Viscosity @ 30ºCby : 5000 – 6000 cP
Brookfield RVT
Spindale No 7
RPM 20

PH : 5.5-6.5

Application guidelines : AOPL –408 can be diluted with polyacrylic acid solution up to 5-10% w/w for viscosity adjustment. The adhesive should be applied as thin as possible with adequate wetting. the performance of the coating depends upon the porosity, absorptive and the type of surface. In general the film should be under slight tension to eliminate the wrinkles. Additionally the speed of the machine should be adjusted based on the level of dilution done to allow proper setting of the coating.

AOPL – 505 - Lamination adhesive for high quality printed board

AOPL –505 is a vinyl-acrylic copolymer emulsion for high quality PVC lamination on board, film and Bopp substrates.

Type : Vinyl acetate Acrylic Copolymer

Solids : 55±1%

Visual Appearance : Milky White

Viscosity @ 30ºCby : 8200 – 9200 cP
Brookfield RVT
Spindale No 7
RPM 20

PH : 5.5-6.5

Application guidelines : AOPL –505 can be diluted with polyacrylic acid solution up to 5-10% w/w for viscosity adjustment. The adhesive should be applied as thin as possible with adequate wetting. the performance of the coating depends upon the porosity, absorptive and the type of surface. In general the film should be under slight tension to eliminate the wrinkles. Additionally the speed of the machine should be adjusted based on the level of dilution done to allow proper setting of the coating.

AOPL – A117 - General purpose pressure sensitive adhesive

AOPL –117 is a general purpose pressure sensitive adhesive for BOPP 9 biaxial oriented polypropylene ) tapes. This has a balanced shear and peel strength with good tack.

Type : Acrylic Emulsion

Solids : 53-55%

Visual Appearance : Milky White

Viscosity @ 30ºCby : 250 – 350 cP
Brookfield RVT
Spindale No 4
RPM 10

PH : 8.0-9.0

Application guidelines : AOPL A117 is being supplied as a low viscosity emulsion and can be applied using meyer bar or air knife. It can also be thickened using conventional thickeners or acrylic thickeners like AOPL –T29. AOPL A117 can be used for BOPP tapes, jumbo rolls, holograms and suit case inner lining etc.

AOPL EM 50 A WOODGLUE

Product Description : Poly Vinyl Acetate Emulsion with Plasticizer

Chemical type : PVA Emulsion

Description : AOPL WOODGLUE is a milky white poly vinyl acetate dispersion which imports a soft handle on paints and ensures full light fastness and non yellowing properties on the paints for retaining their luster.

Visual Appearance : Milky white viscous paste

Solid content : 50 +/- 1%

Viscosity @ 30ºCby : 5000 – 7000 cP measured by Brooke field viscometer

Brookfield RVT Spindale No 7 RPM 20

pH of 1% dispersion : 5 to 7

Nature : Non-ionic

Stability : Stable to hard water, weak acids and alkalis

Compatibility : Good pigments and many thermo setting resin

Plasticizer : 4%

Theme Colors
Layout Style
Background Pattern