Carpet Industry

ProductTypeVisocityPHDownload Link
AOPL 2259STYRENE ACRYLIC 50%1000 - 2000 cP8 ~ 10Click to Download
AOPL 2504Styrene Acrylic 50%750 cP8 ~ 10Click to Download
AOPL P DEFSilicone Defoamer6000 – 8000 cP5.5 ~ 7 poise (approx.)Click to Download
AOPL P DISDispersing Agent120 – 150 cP7.5 ~ 9Click to Download
AOPL – P252Polymer dispersion for clay coating30 – 40 cP6.0-7.0Click to Download
Note: The above information is to the best of our knowledge true and accurate. Since the conditions that the products are used in cannot be handled or controlled by us we cannot guarantee the results and assume liability to damages incurred by using this product Refer to M.S.D.S. for handling procedures.

AOPL 2259 STYRENE ACRYLIC 50%

Chemical type : Styrene Acrylic

Visula Appearance : Milky white

Solid content : 48 +/- 2%

Viscosity @ 30 C : 1000 - 2000 cP

pH : 8 ~ 10

Free monomer content : < 0.3%

Tg. : 9 °C

Properties : It has good wet and dry pick resistance, better heat and mechanical stability. Very good sheets gloss, smoother surface, improved opacity and brightness, improved print gloss.

Recommended Applications : AOPL 2259 can be used as such or along with oxidized starch or casein as natural binders in coating formulations. It is compatible with china clay, calcium carbonate, whiting, titanium dioxide and most other standard pigments.

IT IS MAINLY USED FOR DUPLEX PAPER BOARD



AOPL 2504 Styrene Acrylic 50%

Chemical Type : Styrene Acrylic

Appearance : Milky White

Solid Content : 50 +/- 1%

Viscosity @ 30ºCby : 750 cP
Brookfield RVT
Spindale No 7
RPM 20

pH : 8 ~ 10

Free Monomer Content : < 0.3%

Tg. : 12 ºC

Properties : It has good wet and dry pick resistance, better heat and mechanical stability. Very good sheet gloss, smoother surface, improved opacity and brightness, improve Print gloss.

Recommended Applications : Aopl 2504 is specialized fine particle size binder used for clay coating formulations. It is compatible with china clay, calcium carbonate, whiting, titanium dioxide and most other standard pigments. IT IS MAINLY USED FOR DUPLEX PAPER BOARD.



AOPL P DEF Silicone Defoamer

Chemical Type : Defoamer

Visual Appearance : Thick White Emulsion

Chemical Composition : Dimethyl Polysiloxane

Viscosity @ 30 C : 6000 – 8000 cP
Brookfield RVT
Spindale No 4
RPM 10

pH at 2% : 5.5 ~ 7 poise (approx.)

Suitable Dilutants : Soft water

Defoaming : 9 sec. (approx.)

Uses of Defoamer : Textile Industry, Paper Industry, Dye Manufacturing Industry, Laundries, Paint Industry,Effluent Treatment Plants

Recommendations : It is advisable to add AOPL DEF to any bath before agitation



AOPL P DIS Dispersing Agent

Chemical type : Disperser

Visual Appearance : Water white

Solid content @ 120 °C
for 2 hours : 39% - 41%

Viscosity @ 30 C, on BF-RVT
(SP-4, 10 RPM) : 120 – 150 cP

pH : 7.5 ~ 9

Diluents : Water

Uses of dispersant : AOPL DIS is a pigment dispersant for aqueous systems. It is a low foaming dispersant, especially useful for dispersing inorganic pigments such as titanium dioxide, zinc oxide, clay with improved stability. It is efficient in a wide range of pH in various emulsion systems.



AOPL – P252 Polymer dispersion for clay coating

AOPL –P252 is a new generation, economical paper coating binder based on butyl acrylate versa tic acid ester terpolymer. It can be used to impregnate paper sheets used in the manufacture of laminates, wallpapers and filters. It gives good water resistance, solvent resistance and dimensional stability.

Physical data:

Type : Butyl Acrylate based terpolymer

Visual Appearance : Milky white

Solids : 50% ± 2

Viscosity @ 30ºCby : 30 – 40 cP
Brookfield RVT
Spindale No 7
RPM 20
ph : 6.0-7.0

mfft : 14 deg c

Film : Clear hard film, free from bits

AOPL P252 can be used in the conventional methods such as size press, film press, curtain coating and dipping. Preferred drying temperature can be 110-120 deg c. For extra dimensional stability urea formaldehyde can be used.

Theme Colors
Layout Style
Background Pattern