|AOPL 2259||STYRENE ACRYLIC 50%||1000 - 2000 cP||8 ~ 10|
|AOPL 2504||Styrene Acrylic 50%||750 cP||8 ~ 10|
|AOPL P DEF||Silicone Defoamer||6000 – 8000 cP||5.5 ~ 7 poise (approx.)|
|AOPL P DIS||Dispersing Agent||120 – 150 cP||7.5 ~ 9|
|AOPL – P252||Polymer dispersion for clay coating||30 – 40 cP||6.0-7.0|
AOPL 2259 STYRENE ACRYLIC 50%
Chemical type : Styrene Acrylic Visula Appearance : Milky white Solid content : 48 +/- 2% Viscosity @ 30 C : 1000 - 2000 cP pH : 8 ~ 10 Free monomer content : < 0.3% Tg. : 9 °C Properties : It has good wet and dry pick resistance, better heat and mechanical stability. Very good sheets gloss, smoother surface, improved opacity and brightness, improved print gloss. Recommended Applications : AOPL 2259 can be used as such or along with oxidized starch or casein as natural binders in coating formulations. It is compatible with china clay, calcium carbonate, whiting, titanium dioxide and most other standard pigments. IT IS MAINLY USED FOR DUPLEX PAPER BOARD
AOPL 2504 Styrene Acrylic 50%
Chemical Type : Styrene Acrylic Appearance : Milky White Solid Content : 50 +/- 1% Viscosity @ 30ºCby : 750 cP Brookfield RVT Spindale No 7 RPM 20 pH : 8 ~ 10 Free Monomer Content : < 0.3% Tg. : 12 ºC Properties : It has good wet and dry pick resistance, better heat and mechanical stability. Very good sheet gloss, smoother surface, improved opacity and brightness, improve Print gloss. Recommended Applications : Aopl 2504 is specialized fine particle size binder used for clay coating formulations. It is compatible with china clay, calcium carbonate, whiting, titanium dioxide and most other standard pigments. IT IS MAINLY USED FOR DUPLEX PAPER BOARD.
AOPL P DEF Silicone Defoamer
Chemical Type : Defoamer Visual Appearance : Thick White Emulsion Chemical Composition : Dimethyl Polysiloxane Viscosity @ 30 C : 6000 – 8000 cP Brookfield RVT Spindale No 4 RPM 10 pH at 2% : 5.5 ~ 7 poise (approx.) Suitable Dilutants : Soft water Defoaming : 9 sec. (approx.) Uses of Defoamer : Textile Industry, Paper Industry, Dye Manufacturing Industry, Laundries, Paint Industry,Effluent Treatment Plants Recommendations : It is advisable to add AOPL DEF to any bath before agitation
AOPL P DIS Dispersing Agent
Chemical type : Disperser Visual Appearance : Water white Solid content @ 120 °C for 2 hours : 39% - 41% Viscosity @ 30 C, on BF-RVT (SP-4, 10 RPM) : 120 – 150 cP pH : 7.5 ~ 9 Diluents : Water Uses of dispersant : AOPL DIS is a pigment dispersant for aqueous systems. It is a low foaming dispersant, especially useful for dispersing inorganic pigments such as titanium dioxide, zinc oxide, clay with improved stability. It is efficient in a wide range of pH in various emulsion systems.
AOPL – P252 Polymer dispersion for clay coating
AOPL –P252 is a new generation, economical paper coating binder based on butyl acrylate versa tic acid ester terpolymer. It can be used to impregnate paper sheets used in the manufacture of laminates, wallpapers and filters. It gives good water resistance, solvent resistance and dimensional stability. Physical data: Type : Butyl Acrylate based terpolymer Visual Appearance : Milky white Solids : 50% ± 2 Viscosity @ 30ºCby : 30 – 40 cP Brookfield RVT Spindale No 7 RPM 20 ph : 6.0-7.0 mfft : 14 deg c Film : Clear hard film, free from bits AOPL P252 can be used in the conventional methods such as size press, film press, curtain coating and dipping. Preferred drying temperature can be 110-120 deg c. For extra dimensional stability urea formaldehyde can be used.